Re: Spoked Wheels
Posted by Joe Santana On 2013/12/7 10:37:28
Finish Line Coatings is an excellent ceramic coating place here in Oregon.http://www.finishlinecoatings.com/misc.htm
They put a cast-iron-appearing ceramic coating on my manifolds, and after 6 years since they did it and 8000 miles driving, they both look brand new. They coated my exhaust system "stainless steel," too.
They coat pistons on the inside and out for the heat reducing properties of this technology. Experts.
But on my son's '61 Jag's chrome wire-wheels, which spent decades in a barn without cleaning, I spent 4-1/2 hours on each wheel to bring them back. Some pieces need to be re-chromed, but if you keep chrome parts clean with kerosene and a wax coating (the Meguire wax doesn't leave residue), chrome wire wheels can look good "forever."
Nothing is show-ier than blazing wire wheels in sunlight.
Attach file:
(71.51 KB)
(48.58 KB)
They put a cast-iron-appearing ceramic coating on my manifolds, and after 6 years since they did it and 8000 miles driving, they both look brand new. They coated my exhaust system "stainless steel," too.
They coat pistons on the inside and out for the heat reducing properties of this technology. Experts.
But on my son's '61 Jag's chrome wire-wheels, which spent decades in a barn without cleaning, I spent 4-1/2 hours on each wheel to bring them back. Some pieces need to be re-chromed, but if you keep chrome parts clean with kerosene and a wax coating (the Meguire wax doesn't leave residue), chrome wire wheels can look good "forever."
Nothing is show-ier than blazing wire wheels in sunlight.
Attach file:
(71.51 KB)
(48.58 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=136188