Re: 21st Front Stabilizer
Posted by dallas On 2014/4/26 18:55:14
My Packard is a 1946 Clipper Deluxe. The stabilizer bar that I used to replace the original was from a 1949. They looked the same except for the link ends. As I remember all I did was jack up the front end remove and replace bar using the 1949 hardware.
I believe the radiator cradle mount arrangement is either different on the senior cars because those cars are longer or have bigger radiator. The attached photos show my bar installed behind the cradle and above the mount.
Good luck with the project
Attach file:
(122.69 KB) (86.17 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=143348