Re: Clutch and Brake Arm Rubber Seals

Posted by Packard 1948 On 2015/7/15 21:08:23

I definitely have my seals installed upside down as per the photo.

I have the Steele reproductions and they do look shorter (kinda like they are missing the small end) than the ones in the photo.

Yes...that certainly looks to be the case...when the pedal is pushed down the rubber seal travels down with the pedal and exposes the air gap.

Seems to be kinda a strange design...because when sitting at a stop light for example the brake pedal will be down and if there is blow by the gasses from the road draft tube could enter the car. 1940s technology...

THANKS AGAIN!!!

Bill