Re: Brake Booster Conversion
Posted by Moms 54 On 2015/7/21 16:18:29
It is dark but this is where the booster shaft meets with the pedal arm bracket. (It is only temporary for now)
Up above you can kinda see my inner assembly with yet another inner firewall support plate and then it bends and carries over to where the steering bracket mounts to.
I had actually removed The steering bracket to reinstall it on top of another fabricated bracket of mine that goes accross to the two steering bracket bolt holes.
Then my inner firewall bracket that carries over is bolted to that bracket under the steering braket.
You may notice in this picture the heat duct.
I thought originaly i would have to cut a portion and shorten it. as you can see I started to do but, as I repositioned myself better I noticed all I really needed to do was to cut a portion of the flat mounting portion of that duct.
I will drill new holes in my configuration to mount that duct firm...
This must sound confusing but pictures say all, I'll try for better pic's up in there.
Oh by the way pay no attention to that weld, this is where I ran out of wire and my wiper motor cable will be moved out of the way...
Attach file:
(54.87 KB)
Up above you can kinda see my inner assembly with yet another inner firewall support plate and then it bends and carries over to where the steering bracket mounts to.
I had actually removed The steering bracket to reinstall it on top of another fabricated bracket of mine that goes accross to the two steering bracket bolt holes.
Then my inner firewall bracket that carries over is bolted to that bracket under the steering braket.
You may notice in this picture the heat duct.
I thought originaly i would have to cut a portion and shorten it. as you can see I started to do but, as I repositioned myself better I noticed all I really needed to do was to cut a portion of the flat mounting portion of that duct.
I will drill new holes in my configuration to mount that duct firm...
This must sound confusing but pictures say all, I'll try for better pic's up in there.
Oh by the way pay no attention to that weld, this is where I ran out of wire and my wiper motor cable will be moved out of the way...
Attach file:
(54.87 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=164410