Re: Alignment Specs Suggestions For Radials

Posted by Packard 1948 On 2015/8/23 15:07:27

The car needed an alignment prior to the modification. The camber is way out (can see it visually).

Yes...I installed a Monroe PS unit. This contraption is an externally mounted hydraulic ram rod that is installed in lieu of the center link (cross tube) and the control valve is integral with the unit and the pitman arm when it is moved by the steering wheel ports the fluid to either side of the actuator.

The pump is a Chrysler 6V generator with a PS pump mounted on the back.