Hi David, all the wires in my car are brand new, except the turn signal wires from the switch which were in seemingly good condition.
No matter which way I use the turn signal lever, I get power to both turn signal wires at the switch. The lights are wired correctly, so the issue seems to be in my switch. I didn't have my meter in the hangar tonight so I was only testing with a test light. I cleaned the switch contacts and that's all fine, seems like the short is under the phenolic where the wires solder in. Before I tear further into the switch, which looks pretty good really, I will check my wiring job in the column plug to make sure I didn't get something touching in there. Although when I soldered the wires to the pins there I rang it all out and it was good at that time.
Things that make you go hmmm......
Attach file:
(47.09 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=165838