Re: Heater hose routing 52

Posted by steve-52/200 On 2016/3/15 13:19:47

Man I really had this MESSED Up! I thought the hot water " out" was the tap on the water pump but looking at it I guess I had it backwards
I ve "y"'d the hose to feed a parrelel loop to heat the dual intake manifold I installed
So how I have it now ,understanding from what you said the top of the head is the "out",
It y's and goes through the manifold with one part and the other is going into the top tap of the heater core going in
The side lower tap takes the hose to the outer tap on the firewall this is the part where I can't tell which part of the switch it's going to buts it's the fender or outer side one
Then the inner tap on the firewall is the out from the switch and rejoins the manifold loop to go to the top of the water pump and then to the bottom of the radiator which I guess is the I. For the radiator
The heater core in your pic looks like it had 3 taps !
The valve which would have the curved elbow you mentioned is in a box of some sort where I can see which is which attached to the passenger side of the fire wall