Re: Loss Of Compression After Valve Work

Posted by Steve On 2017/5/11 12:29:51

Just an Update on My Previous Post Of "Loss Of Compression After Valve Work"

I did a Leakdown test of all the valves to see if any of the valves were leaking by and found that none of them were.

Then I made sure that Each Pistion was in the Down Stroke and took a piece of Tubing and Squirted 2 Shots of Oil into Each Cyclinder and Viola the Compression came up from 96 Lbs. to 120 Lbs. Compression.

Put Everything back together and it started right up.

Stranger things happen I Guess?

Thanks everyone who responded to my Post.

Packard Eight
Steve