Re: Feeling Sorry For Myself
Posted by Eric Boyle On 2009/1/6 1:51:47
Quote:
I suggest getting the shaft ...... or spray welded to build the shaft back to spec. Regrind it and then install a new seal. That should solve your problem. Good luck.
This is the best advice so far, even better than my original tongue-in-cheek version! By all means, if the shaft is worn, take it to a machine shop and have them weld and regrind the shaft. You then have a new pinion, provided that the gear portion is ok.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=19452