Re: rough running at high engine speeds
Posted by John Sauser On 2017/10/22 12:07:53
Have you checked to see if the mechanical advance is working?
Find someone with an old SUN dist. machine and have them test it. I find that when there is no mechanical advance the engine starts to give up at about 45-50 MPH.
A quick check is to watch the timing mark on the vibration damper with a timing lite while someone revs the engine, you should see the timing marks advance.
If you suspect a mechanical advance problem and can't find a SUN machine contact me as I have one, and am willing to help out.
Sincerely, John
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=196849