Re: ultramatic linkage tool

Posted by HH56 On 2018/2/28 17:39:12
Can't help on locating the tool but while convenient, unless you just want the tool it is not essential for the adjustment. You can use a straightedge and small engineer scale to get the needed adjustment. These are the pertinent dimensions as given for the second design tool that did not need the .050 shim under it. The engineer scale would need to be flush with the bottom of a straightedge laid across the head to get an accurate measurement.

Attach file:


jpg  (149.09 KB)
209_5a972f7e69b75.jpg 810X1920 px

jpg  (105.16 KB)
209_5a972f8c7d0cf.jpg 1506X864 px

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=200740