Re: Series 23 Curved Rear Window Glass

Posted by BigKev On 2018/7/16 8:33:58

While I haven't done your particular window setup, I did find that long strips of painters tape spaced around the perimeter of the glass every few inches and the seal helps hold it all together when trying to work it over the pinch weld. The tape is easy to rip away after the whole thing is installed. I used straight liquid dish soap (Dawn etc) to lubricate the pinch weld area and the rubber. This really helps and worked much better than water/soap mixture and stays in place. I had also used some 14ga speaker wire in the seal channel to help pull the seal lip over the pinch weld.

Attach file:

---

  (315.72 KB)