Re: Radiator removal, water pump replace?

Posted by Steve Henderson On 2018/10/2 5:13:05
Coincidentally, I am doing this job right now on my 1949 Series 23 Deluxe Eight sedan. I bouoght the water pump from Kanter. I took the radiator to the radiator shop for a cleaning and checkup, and bought all new hoses. I'm doing all this because the water pump was noisy and the fan blades showed some "wiggle" when checked.

I agree with all HH56 says, and would add that the grille center must be removed to get the water distribution tube out for inspection. It was clean and clear this time, but in previous similar jobs I have found the back of that tube packed full of rust and dirt, so I considered it worthwhile to go ahead.

I'm taking advantage of the disassembled status to clean, paint, and detail engine parts I can't normally reach.

Good luck with your project.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=206397