Re: Manual brake conversion

Posted by HH56 On 2021/4/30 17:29:06

Question I have is where are you going to mount and what type pedal? If there is enough room and you mount in the engine compt down toward the original location and adapt to use the bottom of the original PB pedal that will be 1:1 and converted by the new mechanism to 4:1. If you mount up higher near the air vent and connect to the pedal arm that might not provide enough stroke the way the stock pedal assy is suspended. If you install the 55 manual pedal and mount under the floor that will be around 6:1 and you would not need the extra linkage in the new bracket.