Re: Fuel system

Posted by Packard Don On 2023/2/7 19:09:09

The line from the filter at the carburetor goes straight forward, then bends down to the pump. There is no 90 fitting on it as one earlier photo showed. All these lines should be available new as stainless or steel from Classic Tube, or you can easily get used one. Some people like making their own but I do not when there are plenty other options for getting the proper look.

Hose clamps are not needed on the vacuum lines but I haven't looked to see if the parts book lists them. If they do, they are probably the spring type.