Re: Clock stopped working after 3 weeks
Posted by HH56 On 2023/9/14 19:38:02
Quote:
There are two screws accessible from the bezel inside of the car that need to be removed, then it tilts and pulls free of the dash as far as the wires will let it.
If someone has not worked on the cluster before you and left them off, in addition to the screws visible at the top there will probably be two nuts on studs at the bottom of the cluster. Those can only be reached from under the dash and as I recall one of them is in a fairly congested location and only removable if using an end wrench.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=261593