Re: LED brake light/turn signal bar

Posted by Joe On 2024/4/12 23:20:03

Bulbs and flasher were all it took. I had some of their 6 Ohm, 25 Watt "load equalizers" on hand just in case there was an issue with resistance. I will say, the back lights did initially give me a scare - you can't use one incandescent and one LED at the same time. The incandescent will work; the LED will not. Once they were both LEDs, the bulbs functioned as they should.

I need to do another video with at least the park lights on to demonstrate the difference between the running light and an active signal. Will work on that!