Re: Polarizing generator
Posted by Paul E. Gallagher On 2024/7/10 14:44:34
Ok, I removed the ground wire from the arm and it is charging now
I cleaned the terminals
With volt meter, it was idling at about 6.2 and going to 7 amps when revving,
Worked the same with the headlights on. Ammeter on dash was showing same result .
With the car off, ground wire showed 2.3 ohms if I tested it right.
What do I do with the ground wire now?
I am going to clean the field terminals
And attach the condenser to the arm.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=273931