Re: 53 Packard Clipper engine won't turn over

Posted by kens53clip On 2009/7/1 12:54:05

Just thought I would let you guys know I am still working with your suggestions trying to figure out the problem. Bought a 6-12 volt test light at NAPA and proceeded to test the solenoid connections. Thought I got a light reading indicating a problem with the starter so took out the starter and solenoid and took them to a local auto electric rebuild shop. The local shop was kind enough to test them for me without charge and they reported that both starter and solenoid were working properly. Perhaps I did not do my test properly. But gonna keep on trying. Now I know the starter and the solenoid are not the problem. So my next tasks are to test the carburetor starter switch, the key switch, and all points in between. The wiring is not in good shape with some of the insulation flaking off, so I have plenty to work with. Sooner or later I guess I will have to replace the wiring harness, but electrical tape does cost a lot less.
Thanks!
Ken Dunning
kens53clip