Re: Repairing Ultramatic

Posted by Tim Cole On 2009/9/28 7:32:58

Hey, before you go any further did this problem start with the service work or was it already there?

If the problem just started perhaps the fluid level is too high or too low.

If the car moves without excess slip and the fluid was clean then the clutch is probably good.

You may just have stirred up some dirt which has gotten into a valve. I've seen these problems just go away if left to sit.

Some ultramatics are much better than others but they usually do okay if taken care of.

Check TSB's first before you start tearing into things.