Re: Starting problem

Posted by Brians51 On 2009/10/18 7:34:00
By good spark I assume you used a spark tester,or at the very least bare wire to block.The spark must jump at least 1/8 inch.The spark MUST be blue not yellow.Seeing grounded spark plugs spark proves nothing.Also take the points out and check them, they could be badly pitted.They might look good in place but could hide a mack truck between the contacts. Brian

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=38687