Re: 1953 Packard, Carter Carb rebuild input and fuel filter question

Posted by Richard Taylor On 2008/4/10 8:09:41

If your getting alot of sediment in the filter bowl in such a short amount of run time I would suggest you give your fuel tank a good looking at.Also- It sounds like you may already have a plugged main jet in the carb. You may want to consider having your tank boiled and then installing an in-line filter before the fuel pump until the old varnish clears up.Also -todays fuels evaporate at a much higher rate,I use a fuel treatment(Sta-bil) for all my toys that have carbs.