Re: Ultramatic Delay
Posted by Tim Cole On 2011/2/13 14:42:59
This is a tough problem because the Packard manual doesn't have a symptom "delayed high range engagement"
I have heard of UM's having this problem and then it just disappears for some unkown reason.
Why not do a compression test and make sure you have at least 100 psi.
Then hook up a tach and check the motor speed during full throttle acceleration.
If you have high range clutch leakage the RPM will be over 2000.
This is easier than pressure gauges because - quite frankly - checking line pressure in the UM sucks
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=70727