Re: Ultramatic Test Gauge fittings

Posted by HH56 On 2011/4/13 19:43:24
You need the test pan setup on both to have room for the pressure hose to bend out of the valve body and to exit the pan. There is also a "window" on the side of adapter so you can get wrenches in to adjust the throttle valve. Consists of a pan, adapter and extensions for the oil suction or pickup tubes. Without the adapter, I believe the main fitting you will need on the twin for your DD tests is the 1/8 pipe and the special one for converter out if you wanted to check as many others as possible while there.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=74608