Re: Proper psi at carburator
Posted by Mike On 2011/5/4 8:35:17
One regulator did have the 2 "out" ports and one "in" port. Then i switched to the one below and it's just one in and one out and set the fuel pressure. Didn't work reliably at all.
Also weired is that those gold fittings are really black plastic, and the thread on them isn't pipe thread, so i had to use them and rubber line instead of pip thread to flare fittings. Blah.
Attach file:
(11.98 KB)
Also weired is that those gold fittings are really black plastic, and the thread on them isn't pipe thread, so i had to use them and rubber line instead of pip thread to flare fittings. Blah.
Attach file:
(11.98 KB)This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=76096