Re: Starter
Posted by Tim Cole On 2011/8/22 19:02:03
Dear MrBob:
I think thu usual procedure is to groove the mica in the lathe using the bit. 1/32 of an inch is .030. So a sharpened awl should suffice.
If your problem is a slow turning starter then new cables are probably in order. I bought a pair for a car from RI Wiring and the difference was fantastic.
Good luck with your car.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=84342