Re: fuel pump

Posted by JWL On 2011/8/29 21:51:46

If you want to use the expansion chamber with your new pump just get a 1/8" NPT "T". One side male, and the other two sides female. Male side screws into the outlet of the pump; a female side will take the fuel line fitting that used to screw into the pump; and the chamber will screw into the other female side. There is more than one kind of "T" with this arrangement, but you should be able to find the one that works. There is a name for this kind of "T" but I cannot recall it at this time. Simple enough.

(o{}o)