Re: Over drive won't work
Posted by HH56 On 2012/4/17 14:47:04
....that is a great flow chart!
It's not a bad chart. Lot of good stuff in old Motors Manuals.
Not quite all Packard items listed on it though. One thing to know is some Packards with R9 had a reverse safety switch installed or retrofitted in 6v feed wire. Where it says to check fuse, also need to check that switch if installed. Switch is located low on steering column and is a 4 terminal plunger type operated by the shift lever. One set of contacts were safety switch, other set used for back up light if equipped with option.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=99308