Re: '48 '49 '50 Cigar Lighter Wire Attachment

Posted by HH56 On 2012/8/14 22:24:06

Not sure if you mean just a connector or the entire shell.

If the connector, is the stud actually threaded or just serrated and what size. I've seen ring terminals with a brass nut making the connection used on some and a friction type terminal just pushed over the stud on others.

Ring terminals should be easy from any parts store and if the stud is .180 in diameter, then Y&Z and RI Wiring both have a female push on type connector that may work. If smaller than .180 then there are a couple of sizes of common bullet connectors that might also work.