Re: Help! Overheating problems

Posted by Joseph Earl On 2012/8/18 10:48:24

No, it's not.

The funny thing is, when I stopped, the upper rad hose was hard from pressure. In the time it took me to write that post, the temps had gone down. The hose was not under pressure, so I started her up. The gauge read slightly below mid way, and I started back to the shop.

After about four miles and one red light, she started to creep up a little, the needle still touching the mid point dot.

Upon arrival, she's just a little over halfway, not touching the dot. I now see a small drip from the bottom back of the radiator. Maybe the rad wasn't sealed properly, or has sprung a leak. Hadn't leaked before.