Re: '52 200, ultramantic, runs rough at about 50mph or more

Posted by JWL On 2012/9/17 12:12:02
Tim, as we talked on a PM, the rubbing block of your points seems to have seated. This would cause the point gap to close which would cause a relative retardation of the timing. Resetting the points and timing restored the performance.

In the old days we would run the distributor on a test machine for several minutes to allow for rubbing block seating, then readjust the points before reinstalling the distributor. If a test machine is not available, run the engine for a few minutes then recheck and reset the points and timing if needed.

Always a good idea to service the distributor out of the car.

(o[]o)

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=109947