Re: 1940 overdrive

Posted by todd landis On 2008/6/2 19:09:09
Thanks so much for the response. Have checked all fuses and they are ok. This is one thing that I am not sure of is the governor has only one wire, it goes to the harness and somewhere under the dash for to the relay. There is no electro mechanical clutch. Should I go ahead and ground the one wire to the chassis? And the lock out switch? As these are positive ground I didn't want to blow anything out. I am trying not to pull out the solenoid as it is a bit of a pain, but I just might need to. Not only is it hard to get to, but it takes about ten to fifteen minutes of getting just the right angle to get the solenoid rod hooked to the overdrive. Talk to you soon and thanks again.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=7872