Re: 1940 overdrive

Posted by todd landis On 2008/6/5 12:47:52

There is no reverse switch. I did not energize the solenoid when put back in this time, because when I had it out a number of years ago got it back in without doing so. So I think later today I will recheck the governor and energize the solenoid to take out and then put back in. But I do believe that the rod is connected. The solenoid is not upside down as I left the wires connected while servicing the clutch. You talk about binding, I do remember this last time the adaptor plate seems not to make a difference as to which direction, the shaft hole does seem to line up with the solenoid shaft. But, I will check again. So many good ideas thanks.