Re: Synchros?

Posted by HH56 On 2012/10/5 9:04:09

To just check the hose the hydraulic section and lines can stay connected -- just be careful not to pull or twist too violently when removing the top plate. Once the pedal connection, floor plate screws to body and 4 bolts connecting the BTV to the plate are removed, the floor plate can be lifted off and set aside. The top cover to BTV is now held on by 4 bent over tabs near a couple of bolt locations -- If same as later units, there's a couple on top left bolt and 2 on the lower right side bolt. A small pair of channel locks will be able to bend those back quite easily. Lift off the cover and the hose and all connections are revealed.

Attach file:

---

  (40.46 KB)