Re: Successful Packard Hunt
Posted by HH56 On 2012/11/4 23:33:31
I meant when fluid had been sucked into the vacuum side it may have gummed inside the vacuum canister.
This fluid is what I found in mine some time back -- most likely due to the relief port blocked by the gasket. If your mechanic didn't take the vacuum piston out and thoroughly clean the inside of can and the leather seal around the piston edge it can stick very nicely.
Even if he cleaned once, since it is apparently still leaking the fluid may have accumulated again.
Attach file:
(28.58 KB)
(40.46 KB)
This fluid is what I found in mine some time back -- most likely due to the relief port blocked by the gasket. If your mechanic didn't take the vacuum piston out and thoroughly clean the inside of can and the leather seal around the piston edge it can stick very nicely.
Even if he cleaned once, since it is apparently still leaking the fluid may have accumulated again.
Attach file:
(28.58 KB)
(40.46 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=112503