Re: position of R9 Lockout Control Lever on OD case ?

Posted by John Brinegar On 2012/10/24 17:05:10

I discovered that I may have another problem with the solenoid. Even though the # 4 and # 3 ( pull in and hold in contacts seem to work fine, the other two ( #6 contact and # 7 contact look like they are in the wrong position. I mean # 7 is on top of # 6 -It should be the other way around , right ? Therefore the ground out contact will not disengage Am I right and if so, how do I correct this ? Thanks