Re: position of R9 Lockout Control Lever on OD case ?

Posted by HH56 On 2012/10/24 17:28:35

Not understanding how they could have been reversed since the contacts are riveted to the plate. The contact sets are insulated from one another via a phenolic button on one of the leafs. One gets ground thru the plunger and the other thru the plate.

How do things check out electrically? With the solenoid relaxed, 7 should be closed to ground and will open when the plunger is around half way extended. 6 will be open when solenoid relaxed but will close about the same time 7 opens.