Re: position of R9 Lockout Control Lever on OD case ?

Posted by John Brinegar On 2012/11/6 12:42:24

HH56 -Thanks again for your support. I agree with what you are saying. Yes. I have been looking at all the wires in the trunk. This all started with just the right tail light not working. After I installed a new bulb, it still did not burn. So - I decided to check the bulb in the left side to confirm that I had the right bulb. Both were 1154. The owner manual says the tail and stop should be 1158 and the parking and direction signal light 1154. ( your comments on this ) So, now I have no head lights, no tail lights . It seem that MAYBE I shorted some wire as I was checking , and tripped the circuit breaker. I will look again for a short around the license light and left side. Do they plug in ? I do not want to pull the dash switch panel out to check the circuit breaker unless I have to. Here are some good pictures of a 1950 control switch panel under Electrical & Fuel -page 1 , posted on Aug 4. I assume the 50 is same as my 48 ? I do not know why the circuit breaker did not reset , unless it is still shorted or ruined. Thanks