Re: 1953 Instrument Pod Removal

Posted by Rich Bishop On 2013/2/4 12:01:43
Let me chime in here and say that, having done this, you should be very careful of the studs on the bottom side of the instrument pod, they will scratch your dash just under the bezel. Perhaps tape off with half inch aluminum tape or a good masking tape just under the bezel and as close to it as you can get BEFORE pulling it out. My dash got scrathced as it was hanging in place while I removed the wires from the back of the clock, etc. I know from a similar, older thread that others have had this unpleasant experience also. Now I know why a previous owner of my car didn't bother to put the nuts back on the bottom studs during a previous removal.

Good luck!!

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=117043