Re: Retainer and Clip Sizes

Posted by HH56 On 2013/2/19 19:30:41

After so many years and possibly a repair or removal or two, it's not a given that what is there now is what was there originally as far as type. Some of the old clips and sizes are NLA and universals will have to be used now.

On the long straight strips, frequently there are two types mixed. Generally the spring wire type for the majority and particularly if the trim is hard to access from the back. Even if hard to access there is usually one or two of the stud or bolt on type clips strategically placed to cinch down and prevent the long trim piece from shifting. Particularly important on the doors where slamming could make the trim move a slight bit.

If the trim is totally accessible such as in the front fender or trunk then frequently only the stud type. Those in the trunk area usually had a rubber gasket around the stud for waterproofing.