Re: Miss at Idle

Posted by DrewLA On 2013/3/13 17:48:30

The problem is, I haven't "found" anything. I've run acetylene and propane around the choke stove, the manifolds (#1 no longer has any leaks since I tightened the bolts), the base of the carburetor, the brake booster, the windshield wiper motor, the fuel pump, and basically every vacuum line fitting. Yes, the vacuum is low, but I haven't found any other leaks, and my miss is still there.

When idling, vacuum is 16 in. hg., and very steady.