Re: hole in radiator
Posted by Tim Cole On 2013/4/17 15:30:18
Dear Casey:
If a tube has a hole that will require some careful work.
You need a good liquid flux like Ruby and 60/40 solder (60 tin/40 lead), and a good hot propane torch.
Once the metal is tinned you can fill the hole, but most radiator shops might just pinch it off if it non-serviceable.
If there is any corrosion, forget it, but you can try to pickle the area first with hydrochloric acid.
Hope this helps
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=121236