Re: Engines runs stalls when put in gear

Posted by PackardV8 On 2013/8/21 18:48:12

Not likely to be fuel. Otherwise thwre would be some stumbbling. Most likely electrical. Start with EASY things first. If engine ran ok with old condenser tjen put it back on and try it. Note that u can just attach condenser pig tail to diatributor side of coil and ground it with a jumper. If that does.not.correct then remove condenser under cap and replace. Also possible bad coil.s
Just because a NEW condenser or other parts were installed does not mean that they are good.