Re: Engines runs stalls when put in gear
Posted by James Russell Packard III On 2013/8/27 21:06:24
This weekend i will drain and fill with Type F. read about the governor before i remove and clean it.
i will put it on stands and run it like you said. Not sure how long or ?? both ways ?/
I will do this after i change the fluid.
i am reading the Serviceman Training Manual first. Then the others. Because i am a service man and been hit in the head alot so i don't read as fast as i usually did.
I was fooled initially. by the direct clutch/torque converter change. I am used to Chevy and fords from the 60's and 70's/
so my Ultamatic seems to be ok. I heard about the groan thing and that may be fixed by Type F. it only does it when cold.
Thank you again BH
Attach file:
(58.12 KB)
i will put it on stands and run it like you said. Not sure how long or ?? both ways ?/
I will do this after i change the fluid.
i am reading the Serviceman Training Manual first. Then the others. Because i am a service man and been hit in the head alot so i don't read as fast as i usually did.
I was fooled initially. by the direct clutch/torque converter change. I am used to Chevy and fords from the 60's and 70's/
so my Ultamatic seems to be ok. I heard about the groan thing and that may be fixed by Type F. it only does it when cold.
Thank you again BH
Attach file:
(58.12 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=130276