Re: '51 Valve Clatter and Other Mysteries

Posted by Jim L. in OR On 2013/9/11 20:20:34
Quote:

Owen_Dyneto wrote:
Doesn't sound like much if any of a problem if you can find a "Tee" without the restriction, just build the restriction into the fitting (solder it closed and then drill a smaller hole) or into the line, or into the fitting on the filter inlet. At the worst and so sleezy that I'm reluctant to mention it, just partially pinch the feed line the filter a bit.


Ouch!
But that thought had crossed my mind as well. there is even a spot that's hidden by the generator to do it though it would no doubt be best to it as close to the tee as possible.
The real problem - and the amazing one at that is that of finding ANY "cross" style fitting to modify. Hence my posting. They have been made and fairley recently - just no longer stocked.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=131178