Re: 1948 Deluxe 2262 engine vacuum lines

Posted by HH56 On 2013/11/18 9:35:53

Motor is held on with two screws. If you refer to plate 157 in parts manual, item 31.37913 and all the rest of the mechanism it connects to stays in the car.

To replace the motor, as long as the part on the car is not messed with it should only be able to go back on one way. You can put the blades in the parked condition or any position you can work with. Then turn the paddle on the motor so that it can mate into the part already on the car. Once turned so angles match, motor should just slide into position.