Re: Ignition System Problems
Posted by Robert Freeman On 2014/5/7 10:57:09
I would like to report that with all the fantastic help you have given, the car is ALIVE and running better than ever 
It turned out to be a simple matter of a couple of issues:
1. The short wire between the points and outside distributor connection had long u-shaped connectors that would ground whenever the distributor plate advanced far enough.
2. The point gap was way off, thanks to my failing eyesight.
3. The HT wires were not seated into the distributor cap correctly.
WOW - What an experience and I want to THANK ALL OF YOU FOT YOUR HELP!
It turned out to be a simple matter of a couple of issues:
1. The short wire between the points and outside distributor connection had long u-shaped connectors that would ground whenever the distributor plate advanced far enough.
2. The point gap was way off, thanks to my failing eyesight.
3. The HT wires were not seated into the distributor cap correctly.
WOW - What an experience and I want to THANK ALL OF YOU FOT YOUR HELP!
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=143823