Re: Basic U joint 101 dumb question.
Posted by BDeB On 2014/5/5 12:27:23
Here are some photos of the arrows on 2 different drive shafts. One is on the same side as the grease fitting and the other is opposite.
The arrow on the driveshaft lines up with the yoke on the far end that has the pressed in u-joint. The yoke on the slip joint with the pressed in u-joint should line up with the same one on the other end and will do so when the arrows match.
Attach file:
(128.20 KB)
(71.30 KB)
(74.04 KB)
The arrow on the driveshaft lines up with the yoke on the far end that has the pressed in u-joint. The yoke on the slip joint with the pressed in u-joint should line up with the same one on the other end and will do so when the arrows match.
Attach file:
(128.20 KB)
(71.30 KB)
(74.04 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=143721