Re: Shift linkage

Posted by Mark Hill On 2014/5/22 14:23:54

Sorry Ross, no turnbuckle on that shaft. The other two that do the shifting have one. I figure something worn. Not sure why it should be, by all accounts and info I have on my car, the 34000 miles is correct. I'll try the alignment procedure and see if the linkage is out of whack and put the whack back in. The engine in my car is said to have been rebuilt, and I believe this to be correct by what I see. So, I think there could be a possibility that when things were put back together, the linkage geometry could have been compromised.