Ultramatic shift linkage

Posted by Hans Ahlness On 2014/6/16 23:41:58

I'm going through the transmission shift linkages and found a bearing (or bushing, it's solid) in the bellcrank that rides on a pin at the brake master cylinder PN 3.3256 that is no longer pressed into the bellcrank. The bushing was seized onto the shaft of the linkage from the column, must have spun it loose as it took me a fair amount of work to free ot from the shaft. So, anyone have an idea other than finding a new bellcrank assembly with the pressed-in bushing? Maybe I could braze it into place?

Attach file:

---

  (42.29 KB)


  (50.32 KB)